Florida Company Threatens To Fire Employees If Biden Wins

Matt Dillon said:
Airlines are looking pretty bad with the Covid right now.
Click to expand...

Those tool kits I posted a picture of? Those run several thousand dollars a crack to buy. A single pin insertion tool is like $50 + and the crimpers are like $400 and up each. The crimp dies go for about $50 each. If you are putting any sort of mil-spec / military grade electrical connector together you use these guy's tools. The aerospace industry standard is the same.
 
China builds things for a fraction of the cost that we do, and they can build a lot of them fast and a lot of times they are pretty damn good....America is Fucked.
 
Matt Dillon said:
Many Chinese products are total junk.
Click to expand...

Like the drywall they can no longer sell in the US?

https://www.npr.org/templates/story/story.php?storyId=114182073

Between about 2004 and 2007 over 100,000 homes constructed in the US had Chinese manufactured drywall put in. The stuff is toxic with a capital TOXIC. Most of these homes were in the Southern US. The drywall created "sick house syndrome" and had to be entirely ripped out and replaced. The problem was exacerbated by high humidity. The Chinese manufacturer had to be certified to make the drywall to US specifications. The second they got certified they stopped using the correct materials and substituted cheaper ones like fly ash from coal plants with massive amounts of sulfides in it.

Chinese rebar is crap, made from whatever scrap steel is laying about including radioactive materials. The rebar is often subpar on strength and will rust out rapidly due to contaminants in the metal.

https://recyclinginternational.com/business/radioactive-elements-found-in-chinese-steel/8469/
 
T. A. Gardner said:
Like the drywall they can no longer sell in the US?

https://www.npr.org/templates/story/story.php?storyId=114182073

Between about 2004 and 2007 over 100,000 homes constructed in the US had Chinese manufactured drywall put in. The stuff is toxic with a capital TOXIC. Most of these homes were in the Southern US. The drywall created "sick house syndrome" and had to be entirely ripped out and replaced. The problem was exacerbated by high humidity. The Chinese manufacturer had to be certified to make the drywall to US specifications. The second they got certified they stopped using the correct materials and substituted cheaper ones like fly ash from coal plants with massive amounts of sulfides in it.

Chinese rebar is crap, made from whatever scrap steel is laying about including radioactive materials. The rebar is often subpar on strength and will rust out rapidly due to contaminants in the metal.

https://recyclinginternational.com/business/radioactive-elements-found-in-chinese-steel/8469/
Click to expand...

Do you remember how we were assured that HSR was shoddy and would have lots of failures?

Do you remember how we were assured that we did not need to worry about Chinese (or their partner Russia) military gear because it was crap?







So do I.
 
Ralph said:
CAN'T READ?:dunno::readit:

MORE FAKE NEWS......from the mockingbird Marxist media. This company did not say IF YOU DON'T VOTE FOR TRUMP..........U R FIRED. The management simply pointed out the truth.......if you want to keep your jobs and not be subject to LAYOFFS you better think about who you vote for as Biden's stated policies would result in the company no longer being able to stay in business and lay offs would follow, as no business will stay in open when they are losing capital investment dollars...they will take their investment dollars along with those JOBS to an offshore investment firm.

This is a typical LEFT WING LIE. :palm:
Click to expand...

This is pretty much the standard proforma for how the Left distorts the news!
 
Grajonca said:
This is pretty much the standard proforma for how the Left distorts the news!
Click to expand...

GOD DAMN IT.....I need you to get your shit together and understand what is going on....The Left no longer gives a flying fuck what the truth is....most of them will tell you that truth does not exist, that there is only power, and that the ends justify the means!

"Distort" does not even begin to capture the reality.
 
The Left does not care about you, the Left does not care about fair play, the Left does not care about decency, the Left does not care about the Truth.

There is power.

THE END
 
gemini104104 said:
Well take your attack on the rights of employees and their protections under federal law to take it up with the EEOC as a argument, and see what happens.
Click to expand...

Rights of employees? If Biden wins, the industry this company serves may well be curtailed for months, at the minimum. Businesses can't survive without orders.
Should we now be allowed to sue companies who go under because of liberal policies? What will it achieve? Trying to get blood from a stone?
 
RB 60 said:
Rights of employees? If Biden wins, the industry this company serves may well be curtailed for months, at the minimum. Businesses can't survive without orders.
Should we now be allowed to sue companies who go under because of liberal policies? What will it achieve? Trying to get blood from a stone?
Click to expand...

You do understand that historically these BUS RIDES TO UTOPIA tend to end in starvation?

We are so fucked.
 
gemini104104 said:
As a result of this threat that violates equal opportunity employment guidelines, I hope those employees file a lawsuit and grievance with the Federal EEOC as a result of being intimidated and threatened based on their U.S. Constitutional right to vote for whom to choose to vote for and as a violation of their privacy in particular:

Orlando-based Daniels Manufacturing Corporation is now warning its employees to vote for Donald Trump or else be unemployed.

A new report revealed that the company, which flies a large Trump 2020 flag outside its building and has contributed hundreds of thousands to the Trump campaign, sent its employees a letter from Daniels himself warning them that if Joe Biden gets elected they will be out of a job.

“If Trump and the Republicans win the election, DMC will hopefully be able to continue operating, more or less as it has been operating lately,” the letter read. “However, if Biden and the Democrats win, DMC could be forced to begin permanent layoffs in late 2020 and/or early 2021.”

https://dailyboulder.com/florida-co...HfMxdhvX3ktLa2lrmB_P9qxj2vDH38UtphQ6xSIqvMneE
Click to expand...

I know the Alt Right posters will never understand what I am going to post, but I will try anyway.

The reason companies hire people is to make money. The workers do something that benefits the company more than their total compensation. Firing these people in revenge hurts the company.

Companies are not supposed to hire people as charity. Somewhere along the line, the Alt Right has been convinced that companies "give" people jobs, and can take them all away. A company that fired everyone would go out of business.
 
Walt! You stupid fuck!

This company isn't "firing" anyone!

Businesses are run to make a profit, it's how they pay their employees.
Businesses need orders to manufacture products, this business provides
products/tools to the airlines with gov. specifications. If there is a severe
drop in orders, naturally, a business will lay off unneeded employees. Fact.
If the business can't stay profitable with a reduced workforce, there is the
possibility of the business closing. We will see many close if Biden is elected.
 
Walt said:
I know the Alt Right posters will never understand what I am going to post, but I will try anyway.

The reason companies hire people is to make money. The workers do something that benefits the company more than their total compensation. Firing these people in revenge hurts the company.

Companies are not supposed to hire people as charity. Somewhere along the line, the Alt Right has been convinced that companies "give" people jobs, and can take them all away. A company that fired everyone would go out of business.
Click to expand...

Fuck you, Commie! I see your "Surplus Labor Value" insinuation in there, bitch!

Any motherfucker that spouts shit like that has no clue as to how the real world works...at all!
 
T. A. Gardner said:
Those tool kits I posted a picture of? Those run several thousand dollars a crack to buy. A single pin insertion tool is like $50 + and the crimpers are like $400 and up each. The crimp dies go for about $50 each. If you are putting any sort of mil-spec / military grade electrical connector together you use these guy's tools. The aerospace industry standard is the same.
Click to expand...

They're only so expensive because they sell to the military.
 
You must log in or register to reply here.
Back
Top